Wishlist
view wishlist
Cart

    VEVOR Car Spring Compressor 4.5T Hydraulic Spring Compressor Car Tool 1T Nominal Pressure Force Spring Strut Compressor 11-13 cm & 14-17 cm Spring Lock Suspension Strut Tensioner with Leak-Proof Hydraulic Pump 4,5T

    • 213500 IQD
    4.5 / 5 (818 reviews)

    Brand: VEVOR

    • 4.5 Ton Hydraulic Load Capacity The hydraulic spring compressor has a load capacity of 4.5 tons, and the rated pressure force is 1 ton. Our spring compressor is ideal for various vehicle types, including sedans, SUVs, SUVs and vans. Perfect for disassembly of springs and maintenance of shock absorbers.
    • VERSATILE TIGHTING OPTIONS Our spring compressor comes with two clasps for maximum versatility. The small spring clasp is suitable for sizes of approx. 11 cm to approx. 13 cm, while the large spring clasp fits sizes of approx. 14 cm to approx. 17 cm. With a maximum compression stroke of 320 mm and 8 positioning holes on the column, you can easily adjust the position of the fastener to the different spring heights.
    • STURDY SUSPENSION Our spring compressor, where safety and comfort are paramount, has a sturdy suspension system that prevents rocking due to spring tension. It stops in the current position and lowers only slowly when you press the pressure release valve.
    • Safety guarantee: the strut compressor provides multi-layer protection: an approx. 100 cm long safety chain to secure the springs, an additional sturdy locking mechanism and a safety tongue on the clasp to prevent accidents when loosening the springs. The H-shaped, sturdy base ensures minimal wobble during operation. For added safety, two pre-drilled holes that allow you to anchor the compressor in the ground.
    • PREMIUM MATERIAL CONSTRUCTION The hydraulic spring compressor features a dense hydraulic pump and a damped hydraulic rod for seamless lifting and lowering. The reinforced Q235 steel column and ductile cast iron brackets provide unparalleled durability to withstand extreme pressures, ensuring heavy-duty springs without the risk of breakage or bending.
    ASIN:
    • B0CGXJ9TSN
    Category:
    • Steering & Suspension Tools / Spring Compressors
    brandVEVOR
    colorRed
    materialAlloy Steel
    weight57.3 Pounds
    Voltage12 Volts (DC)
    Recommended uses for productAutomotive Maintenance (Springs & Shock Absorbers)
    Power sourceBattery Powered
    Special featureEasy to use
    Special FeaturesEasy to use
    Capacity4.5 Tons
    Item Weight57.3 Pounds
    Item Dimensions L x W x H48L x 40.1W x 104H centimetres
    ColourRed
    StyleModern
    Included Components1 x hydraulic spring compressor
    Country of OriginChina
    Model NumberYS-02
    Model NameSpring Compressor
    ManufacturerVEVOR
    Manufacturer Warranty Description1 year.
    Global Trade Identification Number00197988622376
    Part Number4.5 Ton Strut Spring Compressor
    Item Type NameSpring Compressor
    Unit Count1.0 count
    ASINB0CGXJ9TSN
    Customer Reviews4.5 4.5 out of 5 stars (818) 4.5 out of 5 stars
    GTIN197988622376 840349961088
    • 4.5 Ton Hydraulic Load Capacity The hydraulic spring compressor has a load capacity of 4.5 tons, and the rated pressure force is 1 ton. Our spring compressor is ideal for various vehicle types, including sedans, SUVs, SUVs and vans. Perfect for disassembly of springs and maintenance of shock absorbers.
    • VERSATILE TIGHTING OPTIONS Our spring compressor comes with two clasps for maximum versatility. The small spring clasp is suitable for sizes of approx. 11 cm to approx. 13 cm, while the large spring clasp fits sizes of approx. 14 cm to approx. 17 cm. With a maximum compression stroke of 320 mm and 8 positioning holes on the column, you can easily adjust the position of the fastener to the different spring heights.
    • STURDY SUSPENSION Our spring compressor, where safety and comfort are paramount, has a sturdy suspension system that prevents rocking due to spring tension. It stops in the current position and lowers only slowly when you press the pressure release valve.
    • Safety guarantee: the strut compressor provides multi-layer protection: an approx. 100 cm long safety chain to secure the springs, an additional sturdy locking mechanism and a safety tongue on the clasp to prevent accidents when loosening the springs. The H-shaped, sturdy base ensures minimal wobble during operation. For added safety, two pre-drilled holes that allow you to anchor the compressor in the ground.
    • PREMIUM MATERIAL CONSTRUCTION The hydraulic spring compressor features a dense hydraulic pump and a damped hydraulic rod for seamless lifting and lowering. The reinforced Q235 steel column and ductile cast iron brackets provide unparalleled durability to withstand extreme pressures, ensuring heavy-duty springs without the risk of breakage or bending.

    Sehr gut 👍

    5/5 · B.Mark

    Für einen einmaligen Austausch der Stoßdämpfer hat es hervorragend funktioniert. Es wirkt sehr stabil und qualitativ gut verarbeitet. Außerdem ist der Preis für die Arbeit, die es leistet, wirklich fair. Ich bin zufrieden, zumindest für dieses eine Mal hat es seine Aufgabe geschafft. Wie es sich in Zukunft bewähren wird, kann ich noch nicht sagen, aber momentan kann ich sagen, dass das Werkzeug sehr gut verarbeitet ist.

    Für gelegentliches Federwechseln perfekt.

    5/5 · "asw1974"

    Für das Geld funktioniert der Federspanner sehr gut. Ich habe damit mühelos die Frontferdern bei meinem Mercedes W638 gewechselt. Das ging ohne Probleme. Der einzige Minuspunkt ist, dass die Farbe sich am Hauptprofil löst, wenn beim verschieben Druck drauf kommt. Für gelegentliches Federwechseln perfekt für den Preis.

    Schnell und zuverlässig

    5/5 · Amazon Kundenrezensionen

    Schnelle Lieferung, Qualität sehr zufriedenstellend, immer wieder gerne

    gut und günstig

    5/5 · Jörn Both

    sehr gutes Gerät Arbeitserleichterung

    Preisleistung OK tut was es soll

    4/5 · Dietmar Ullmann

    Presse erfüllt ihren Zweck.Zylinder fährt nicht von selbst ein. Es braucht Unterstützung mit etwas Kraft beim Einfahren, wenn man die Fahrwerksfeder aus der Presse nehmen will.Lackierung platzt ab, der Stahl wurde wohl vor der Lackierung nicht entfettet .Bilder wurden nach zweimaliger Nutzung aufgenommen.Für den Preis muss man Abstriche machen. Für gelegentiche Nutzung bei diesem Preis vollkommen ok.Würde die Presse wieder kaufen. Hat den Austausch meiner Fahrwerksfedern sehr erreichtert.Fazit Preisleistung OK, Funktion OK etwas Kraft erforderlich.

    Sehr guter Artikel!!!

    5/5 · Erwin Lange

    Absolut geniales Teil,sehr leicht zum zusammenbauen und zu händeln.

    Nicht das was ich erwartet habe!

    3/5 · Waldi

    Nicht so zufrieden!Beschädigung am Gerät, die Beschreibung ist nur auf Englisch, die 2 Kreuzschrauben am Hubzylinder sind sehr beschädigt!!Ich weiß nicht ob das normal ist..... Der Hubzylinder fährt nur bis zum Ende ein, wenn man stark andrückt, und fährt nicht von selbst ganz ein!

    super

    5/5 · Heinz Wi.

    Feder spannen endlich problemlos. Hätte ich mir schon viel früher kaufen sollen...

    Well made and safe to use.

    5/5 · Clinton

    Works great. Well made and best price anywhere. You ABSOLUTELY NEED to make a wide base to use this stand. I have attached a pic. The stand is heavy duty, but the weight of a shock would tip it over and especially when trying to loosen the cap nut on a coilover, it would tip over. Having a base would also allow you to stand safely behind the press while working.

    PRO.

    5/5 · Tomas Laszlo

    Riktigt BRA.

    Worth the money!

    5/5 · Justin

    Works great, way better than the sketchy side mount versions, worth the money.

    Pressa molle

    5/5 · Patrol

    Ottimo! Fa il suo lavoro egregiamente.

    Brilliant. Highly recommended.

    5/5 · Karl

    I am only just getting into mechanicing in my mid 50s. There are only two things that scare me, springs under compression and grinders. This has cured me of one of my fears.I was able to remove, replace and refit my top strut bearing in around 15 minutes each side.This made the actual bearing swapping a sub one minute task and felt as safe as anything.I love this tool and would even volunteer to do other peoples springs now I have this.Summary: VERY easy to use, makes the job fast and easy, and remove the pucker factor.

    Frequently bought together

    Useful add-ons and products customers often order with items like this.

    +
    +
    Total for selected items281000 IQD

    Similar products

    Compare alternatives from the same category, brand or feature set.

    Product buying guide

    This product from VEVOR in Steering & Suspension Tools / Spring Compressors can be reviewed by features, specifications and available options before ordering.

    VEVOR Steering & Suspension Tools / Spring Compressors 4.5/5 rating

    What stands out

    • 4.5 Ton Hydraulic Load Capacity The hydraulic spring compressor has a load capacity of 4.5 tons, and the rated pressure force is 1 ton. Our spring compressor is ideal for various vehicle types, including sedans, SUVs, SUVs and vans. Perfect for disassembly of springs and maintenance of shock absorbers.
    • VERSATILE TIGHTING OPTIONS Our spring compressor comes with two clasps for maximum versatility. The small spring clasp is suitable for sizes of approx. 11 cm to approx. 13 cm, while the large spring clasp fits sizes of approx. 14 cm to approx. 17 cm. With a maximum compression stroke of 320 mm and 8 positioning holes on the column, you can easily adjust the position of the fastener to the different spring heights.
    • STURDY SUSPENSION Our spring compressor, where safety and comfort are paramount, has a sturdy suspension system that prevents rocking due to spring tension. It stops in the current position and lowers only slowly when you press the pressure release valve.
    • Safety guarantee: the strut compressor provides multi-layer protection: an approx. 100 cm long safety chain to secure the springs, an additional sturdy locking mechanism and a safety tongue on the clasp to prevent accidents when loosening the springs. The H-shaped, sturdy base ensures minimal wobble during operation. For added safety, two pre-drilled holes that allow you to anchor the compressor in the ground.

    Before you buy

    • Confirm the dimensions: 48L x 40.1W x 104H centimetres.
    • Estimated item weight: 57.3 Pounds.
    • Compare it with the similar products below if you want another brand, price or feature set.
    213500 IQD