Wishlist
view wishlist
Cart

    Pack of 15 Drill Chuck Collet Set Compatible with Dremel, Accessory Set for Multifunctional Tools, 1/32 Inch to 1/8 Inch Replacement 4486 Quick Change Drill Chuck with Replacement 4485 Brass Collet Metal Nut

    • 26250 IQD
    4.5 / 5 (1223 reviews)

    Brand: FOTYBEI

    • Wide application: the chuck collet set is compatible with Dremel rotary tools and is ideal for lightweight accessories such as carbide burrs, grinding drums, polishing discs, wire and bristle brushes and cutting discs.
    • Quick change drill chuck: the built-in springs ensure a better connection and prevent the accessories from falling or flying out during use, provide excellent stability. The keyless chuck can hold various accessories from 1/32" to 1/8" shank size.
    • 【Metal Nut】Made of metal material, sturdy and sturdy. The plastic nut on the market often break during use, but the all-metal nut solves this quality problem very well. They are more durable and safer than plastic materials.
    • 【Brass Collet】Made of high quality brass, it is durable and long lasting. The brass collet offers a great improvement in precision and holds fine bits firmly. It not only remains stable at high speeds, but also increases work efficiency.
    • 【15 pieces drill chuck set】Our set contains 1 x keyless chuck, 2 x metal nuts, 10 x brass collets, 1 x super thin open-end wrench, 1 x L-shaped key. If you have any questions, leave us a message, and we will provide a satisfactory solution with a full refund or replacement. (Tip: please check the size before purchasing)
    ASIN:
    • B0CLV9S4Y7
    Category:
    • Drill Accessories / Collets
    brandFOTYBEI
    materialMetal brass
    Item diameter3.18 Millimetres
    Compatible devicesDrilling Machine
    Thread size1/4-20 UNC
    Included ComponentsRotary Tool Accessories
    ManufacturerFOTYBEI
    Part NumberFOTYBEI-CHUCK-01
    Model NumberFOTYBEI-CHUCK-01
    Country of OriginChina
    Item Type NameChuck
    Unit Count1.0 count
    ASINB0CLV9S4Y7
    Customer Reviews4.5 4.5 out of 5 stars (1,223) 4.5 out of 5 stars
    Capacity0.13 inches
    Lock TypeManual
    Handle TypeHand Tightened
    GTIN700433457791
    • Wide application: the chuck collet set is compatible with Dremel rotary tools and is ideal for lightweight accessories such as carbide burrs, grinding drums, polishing discs, wire and bristle brushes and cutting discs.
    • Quick change drill chuck: the built-in springs ensure a better connection and prevent the accessories from falling or flying out during use, provide excellent stability. The keyless chuck can hold various accessories from 1/32" to 1/8" shank size.
    • 【Metal Nut】Made of metal material, sturdy and sturdy. The plastic nut on the market often break during use, but the all-metal nut solves this quality problem very well. They are more durable and safer than plastic materials.
    • 【Brass Collet】Made of high quality brass, it is durable and long lasting. The brass collet offers a great improvement in precision and holds fine bits firmly. It not only remains stable at high speeds, but also increases work efficiency.
    • 【15 pieces drill chuck set】Our set contains 1 x keyless chuck, 2 x metal nuts, 10 x brass collets, 1 x super thin open-end wrench, 1 x L-shaped key. If you have any questions, leave us a message, and we will provide a satisfactory solution with a full refund or replacement. (Tip: please check the size before purchasing)

    Passen

    5/5 · Hans- Markus Adamek

    Ersatzteile passen exakt und sind von guter Qualität.

    Passt perfekt

    5/5 · O

    Perfekt, passt so wie es sein soll, Werkzeuge sind schnell gewechselt.

    Schnelle Lieferung

    5/5 · Hans-Joachim Renzing

    Gutes Produkt

    Passt gut

    4/5 · Amazon Kunde

    sehr gut und passt genau

    OK

    5/5 · Ganz normaler Kunde

    OK

    Handwerk

    5/5 · Amazon Kunde

    Einwandfrei, passen bei mir super

    Nützliches Tool für den Dremel!

    5/5 · Rainer Sackers

    Ein super Zubehörteil für den Dremel!den man öfters braucht! Ich benutze es für die Stein Bearbeitung!

    Man kann damit leben

    3/5 · mannus

    Wie schon ein anderer Kunde geschrieben hat sind die Spannzangen sehr tief freigebohrt.Allerdings paßt auch der hintere Winkel nicht richtig auf die Welle.Das ist sehr ungünstig zumal der Durchmesser der Hülsen ebenfalls besser in die Welle passen sollte.Das Bohrfutter ist okay.Aber ja ,der Preis!Für besseres müsste man das vielfache bezahlen-was ich nicht gefunden habe!

    Good

    5/5 · Kindle Customer

    Good quality

    M12 Rotary tool compatible, quality parts.

    5/5 · fredZep

    This kit is compatible with my Milwaukee M12 rotary tool, and fits perfectly. I had no trouble using the collets. The included chucks are much easier than swapping collets all the time. They allow a quick exchange of bits and hold them without oscillation, so they function just like an oem piece.It's a good deal, five collets and three chucks included. The kit was a fraction of the cost of a similar Dremel or generic set at the hardware store.This kit is still in use and hasn't failed to date.

    Mandrin

    5/5 · Anne

    Pièces de serrage pour dremelTrès bien

    Calidad y precio buenas para aficionados

    5/5 · juaco

    Buena calidad las utilizo poco, pero hasta ahora todo sin problema

    Mandrini dremel

    5/5 · Cliente Amazon

    Sono uguali agli originali

    Frequently bought together

    Useful add-ons and products customers often order with items like this.

    +
    +
    Total for selected items135000 IQD

    Similar products

    Compare alternatives from the same category, brand or feature set.

    Product buying guide

    This product from FOTYBEI in Drill Accessories / Collets can be reviewed by features, specifications and available options before ordering.

    FOTYBEI Drill Accessories / Collets 4.5/5 rating

    What stands out

    • Wide application: the chuck collet set is compatible with Dremel rotary tools and is ideal for lightweight accessories such as carbide burrs, grinding drums, polishing discs, wire and bristle brushes and cutting discs.
    • Quick change drill chuck: the built-in springs ensure a better connection and prevent the accessories from falling or flying out during use, provide excellent stability. The keyless chuck can hold various accessories from 1/32" to 1/8" shank size.
    • 【Metal Nut】Made of metal material, sturdy and sturdy. The plastic nut on the market often break during use, but the all-metal nut solves this quality problem very well. They are more durable and safer than plastic materials.
    • 【Brass Collet】Made of high quality brass, it is durable and long lasting. The brass collet offers a great improvement in precision and holds fine bits firmly. It not only remains stable at high speeds, but also increases work efficiency.

    Before you buy

    • Compare it with the similar products below if you want another brand, price or feature set.
    26250 IQD